Smart CI Solution with Audiophile Performance for Distributed Audio
The Ncore amplifier platform delivers stable and efficient power with high current capability, all in a slim 1U rack space. To make this level of performance possible, the CI 8-150 DSP uses a customized version of the proven Ncore output stage. This allows for massive power with extremely low distortion and noise in the audible range. Every detail of this design has been carefully executed to wring out every last drop of performance. Designed to deal with the demands of the CI world, it was made to handle long cable runs and difficult speaker loads.
For additional flexibility for the system designer, the CI 8-150 offers multiple inputs including an additional two coax inputs and two optical inputs.
NAD is keenly aware that reliability is paramount for a professional installer so all models will be based on tried and true amplification platforms delivering stable and reliable performance. The CI 8-150 amplifier is robust and stable at 4 Ohm impedance. A variety of power methods are available as well as an Eco mode setting for minimal power consumption.
Key Features of the NAD CI 8-150 DSP Amplifier
8 Channels x 150 Watts @ 8 Ohms
Bridgeable to 4 Channels X 280 Watts @ 8 Ohms, all channels driven
Ncore amplifier technology for audiophile sound quality
2U Rack Height- saves valuable rack space
Platform accessed through IP control
Custom web app manages DSP calibration, IP control and more
Effectively handles long cable runs and difficult speaker loads
Dual global Inputs/Outputs
0.5W Standby Mode, 3W Network Standby
12V Trigger In; IR In/Out
Auto Sense Turn-on
Universal AC Power Supply
GENERAL
Continuous output power into 8 ohms
150 W (ref. 20 Hz-20 kHz at rated THD – all channels driven)
180 W (ref. 20 Hz-20 kHz at rated THD – two channels driven)
Continuous output power into 4 ohms
180 W (ref. 20 Hz-20 kHz at rated THD – all channels driven)
300W (ref. 20 Hz-20 kHz at rated THD – two channels driven)
Continuous output power into 8 ohms at Bridged mode
280 W (ref. 20 Hz-20 kHz 0.02% THD – all channels driven)
500 W (ref. 20 Hz-20 kHz 0.02% THD – two channels driven)
THD (20 Hz – 20 kHz)
0.02% (1 W to 120 W, 8 ohms and 4 ohms)
Signal-to-Noise Ratio
90 dB (A-weighted, 500 mV input, ref. 1 W out in 8 ohms)
Clipping power (All channels driven)
160W(1kHz8ohms 0.1%THD)
200W(1kHz4ohms 0.1%THD)
Clipping power into 8 ohms at Bridged mode
300 W (1 kHz 0.1 % THD – all channels driven)
550 W (1 kHz 0.1 % THD – two channels driven)
IHF Dynamic Power (all channels driven) – 8 Ohms
180W
IHF Dynamic Power (all channels driven) – 4 Ohms
280W
IHF Dynamic Power (two channels driven) – 8 Ohms
200W
IHF Dynamic Power (two channels driven) – 4 Ohms
360W
IHF Dynamic Power (Bridged mode, All channels driven) – 8 Ohms
520W
IHF Dynamic Power (Bridged mode, All channels driven) – 4 Ohms
670W
IHF Dynamic Power (Bridged mode, Two channels driven) – 8 Ohms
600W
IHF Dynamic Power (Bridged mode, Two channels driven) – 4 Ohms
800W
Peak output current
26A(1ohm,1ms)
Damping Factor
150 (ref. 8 ohms, 20 Hz to 6.5 kHz)
Frequency Response
±0.5dB(20Hz-20kHz)
Channel Seperation
75 dB (1 kHz)
65 dB (10 kHz)
Maximum undistorted input level
3300 mV
Input sensitivity (for 150 W in 8 ohms, maximum volume)
1450 mV
Analog Input audio sense threshold (one channel with signal)
3 ± 0.5 mVrms (ref. 100 Hz – 10 kHz)
Trigger IN level
3-30Vdc
Standby power
0.5 W
DIMENSION AND WEIGHT
Gross dimensions (W x H x D)*
483x90x435mm
19 1/16 x 3 9/16 x 17 3/16 inches
Shipping Weight
17.6 kg (38.8 lbs)
